karsilama_son.jpg (100 KB)
  • Ürün Özellikleri
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Tavsiye Et
  • Resimler
  • PropStick USB


    The PropStick USB is a rapid development tool for the powerful 8-cog multiprocessing Propeller microcontroller. The flexibility of a 40-in DIP package is combined with the convenience of an onboard Propeller P8X32A-M44, EEPROM, voltage regulator, removable 5 MHz crystal, reset button, and USB interface. This module is ready for rapid protoyping use in a breadboard, perfboard with wire-wrap, or in a 600 mil 40-pin socket soldered to a PCB.

    The PropStick USB is intended to be used in a breadboard or other through-hole design.

    Key Features:

    • Propeller P8X32A-M44 chip
    • 32 KB 24LC256-I/ST EEPROM
    • FTDI FT232RG and mini USB connector
    • USB data transfer indicator LEDs
    • 5 MHz crystal in a removable socket
    • 3.3 V, 500 mA voltage regulator
    • Reset pushbutton switch

    Note: The PropStick USB is not intended to be plugged into 40-pin sockets made for the Parallax BASIC Stamp 2p40, due to differences in programming interface, pinouts, and supply voltages.

    • Power requirements: regulated 6 - 9 VDC.
    • Communication: 232R USB interface to PC for programming and bidirectional communication
    • Dimensions: 2.0 x 0.6 x 0.45 in (51 x 16 x 12 mm)
    • Operating temp range: +32 to +158 °F (0 to +70 °C)
    DownloadDetailsMore Info
    PropStick Layout Design File - 21.37 KB | updated: 25 Nov 2015 - 11:30 am
    PropStick USB Product Guide - 203.62 KB | updated: 27 Sep 2012 - 3:11 pm
    Propeller Education Kit Labs - PropStick USB Setup - 1.25 MB | updated: 26 Sep 2012 - 3:30 pm
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.