karsilama_son.jpg (100 KB)
Parallax

Propeller Professional Development Board

Parallax
Fiyat
:
99,00 USD + KDV
Paylaş:
  • Ürün Özellikleri
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Tavsiye Et
  • Resimler
  • Propeller Professional Development Board

    The Propeller Professional Development Board (PPDB) is a high-quality, fully-integrated development platform for the Propeller P8X32A multicore microcontroller.  A wide variety of peripheral connectors and typical I/O devices such as LEDs and buttons are built into the board, providing the developer with an ideal platform for rapid Propeller project development.

    Key Features:

    • On-board voltage regulators provide 5 V and 3.3 V supplies for your application circuits   
    • Contains the most common I/O interfaces for the Propeller chip on one board  
    • Large breadboard area gives plenty of room for additional components and devices
    • 24LC256 32 KB EEPROM included
    •  Propeller Chip - 40-Pin DIP Chip
    • 5 MHz crystal included
    • 5V and 3.3V regulators on board
    • Built-in USB programming/communication interface
    • Six blue 16-segment LED displays
    • Sixteen blue discrete LEDs
    • L293D high-current driver for motors, solenoids, etc.
    • Eight active-low pushbuttons with 3.3V pull-ups
    • Eight active-low DIP switches with 3.3V pull-ups
    • Two 10 k-ohm potentiometers
    • Eight servo headers with selectable on-board/external power source
    • DS1302 real-time clock with battery backup/charging capability
    • MAX4411 headphone amplifier with 1/8" stereo audio jack
    • MAX3232E RS-232 DCE interface
    • RCA jack for broadcast TV or composite video
    • Two PS/2 ports with 5V power and 3.3V pull-up resistors on clock/data lines
    • 15-pin HD D-sub connector for VGA monitor
    • Two ground terminals for logic analyzer/oscilloscope probe ground clips
    • Voltage requirements: 7–12 VDC
    • Current requirements: 59 mA quiescent current (@ 12 V)
    • Communication: USB serial programming interface (FT232R)
    • Dimensions: 9 x 5.25  x 0.75 in (23 x 13.5 x 2 cm)
    • Operating temp range: 32 to 158°F (0 to 70°C)

    Propeller Professional Development Board Guide - 1.55 MB | updated: 30 Apr 2014 - 3:38 pm
    Propeller Professional Development Board Schematic - 92.3 KB | updated: 04 Oct 2012 - 4:17 pm
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.